Aqueous or Solvent Waste Collection:

• CS-245A -->  Acids, Caustics
• CS-245S -->  Solvents (Class I, Division II components)

• Chemical waste collection units are designed for gravity-fed or pumped collection of aqueous or solvent chemical wastes.
• Each automated unit is manufactured to accommodate up to two 200 liter drums for collection of waste chemical to be remediated off-site.  
• Systems can be placed in a variety of locations as they are self-contained and incorporate multiple safety features that protect personnel and facilities.
• The control system can be integrated into a factory monitoring system or as a stand-alone module with e-mail capability.
• Facility requirements; Power, Water, Clean Dry Air and Exhaust.

FEATURES:

• PLC controls with Human Machine Interface (HMI) screen
• Drum full and system status; e-mail option  
• Status indicator lights
• Configurable for 30 - 200 liter containers (2 each/customer supplied)
• Quick disconnect interface
• Load cells for drum liquid level sensing
• Easily configurable for different chemical densities
• All wetted components constructed of chemically compatible tubing, valves and fittings
• 3/4 inch tubing for 30  or 200 liter collection system
• Coated drum rollers for easy drum removal
• Front access only – dual doors for ease of drum removal
• Cabinet sized for 110% containment of chemical
• Dual chemical leak detectors
• Optional Fire Suppression System for flammable solvent systems
• Class I, Division II electrical components for solvent systems
• CDA purge for aqueous electrical box
• Pump for chemical removal from cabinet sump
• Water spray gun for aqueous chemical system
• Nitrogen spray gun for solvents

Options:

• PFA wetted components
• FM 4910 plastic for aqueous cabinet
• Stainless steel wetted components for solvent chemicals
• Stainless steel cabinet; standard on solvent systems
• Optional Fire Suppression System
• Ethernet connection to SCADA/FMS

Safety Features:

• Drum overfill sensors
• All valves programmed to automatically close with power loss
• Low exhaust pressure switch
• Door interlocks
• Dual leak detectors
• 24 Volt DC controls

Utilities:

• Clean Dry Air (CDA)
• Power (120 VAC, single phase 60 Hz or 230 VAC, single phase, 50 Hz )
• Chemical exhaust
• Water (Spray gun, aspirator if used)
• Nitrogen (for spray gun in solvent collection systems)
• Communications cabling (if connected to Factory Monitoring or Life Safety System)

Reliability:

• Uptime > 99.5%
• MTTR < 60 minutes